Remote Monitoring; Live View - Q-See QS SERIES Setup Manual

STEP 13. Click the Reset button
STEP 14. Click "Yes" when asked, "Are
you sure you want to change the
setting for this zone?"
STEP 15. Click OK
STEP 16. Click Apply
STEP 17. Click OK
STEP 18. Close Internet Explorer
You are now ready to access the DVR using Internet Explorer.
Downloading the Plug-In
Another alternative is to download the plug in application directly.
The plug-in, named RM_N9dvrocx.zip can
be download by clicking on the Download
plug-in link on the Login screen.
Save the .zip file to your hard drive. You will
need to save or move it to a specific folder on
your computer.
Windows XP: C-Windows-System32 folder
Windows 7: C-Windows-SysWow64 folder
Once you have placed the file in the correct
folder, you will need to unzip (extract) the files
within that folder.
Quit out of Internet Explorer and restart the program to connect to the DVR.
28
PICTURE 3-16
PICTURE 3-17

3.2 REMOTE MONITORING

The View DVR remote monitoring program's default mode is the Live View window, which
shows video feeds from one or more cameras along with providing additional controls.
There are two other modes - Playback and Configure - which allow you to play back video
recorded on the DVR and change the settings on your system, respectively.

LIVE VIEW

The controls in this mode are limited to those that affect the viewing of live feeds from your
cameras.
In multiple-camera display mode, the controls will affect only the screen outlined in green. You
can drag a camera's video to another section of a multi-camera view where the feed that was
previously there will move to the now-empty location of the first channel. Double-clicking on a
channel in multi-camera display mode will change the mode to single-camera view. Double-
clicking it again will return to the multiple screen mode.
Switch to the Playback and Configure modes using the tabs at the top of the screen. You can
log out of the remote monitoring program from any mode by clicking on the Logout button in
the upper right corner for PC users. Users of View Client on the Macintosh only need to quit
out of the program.
The following page shows screenshots from both the View DVR plugin for Windows and
View Client for Macintosh, along with a table identifying key features.
29