Q-See QS SERIES Setup Manual page 16

View DVR (PC)
1 2 3
6
7
8
9 11 13
10 12
PICTURE 3-18
View Client (Macintosh)
1
20
21
6
17
18
PICTURE 3-19
30
4 5
15 17
14 16 18
2 3 4
19 9
14
# Name Function
1 Live View Tab Sets program's mode to Live View
2 Playback Tab Sets program's mode to Playback
3 Configure Tab Sets program's mode to allow you to configure the DVR
4 Video Display Displays video feeds from one or more cameras.
5 Logout Logs out of View DVR (Quit Net Client to log out on Mac)
6 PTZ Controls Control a PTZ camera directly, or cause it to begin a pre-
programmed function
7 Hide Controls Hides the left control panel, increasing viewing area (Not available
on Mac)
8 Picture Adjust Adjusts brightness, contrast,hue and etc. Only affects live video.
(Not available on Mac)
9 Snapshot Selected camera will capture a still image and save it to your
computer's hard drive.
10 Record All channels will begin recording video. (Not available on Mac)
11 Open/Close Turns video feeds on or off
Window
12 Main Stream Uses the DVR's main stream for monitoring. This requires
increased bandwidth.
13 Sub Stream Uses a lower-resolution secondary stream from the DVR.
14 Mute/Volume Mutes or adjusts volume if there is an audio feed
Control
15 Original/Full Adjusts aspect ratio of video image to fill available space.
Window
16 Full Screen Displays video feed(s) without controls. On systems with multiple
monitors, this will fill the primary monitor. Right-click to exit this
mode.
17 Multiple-display Depending on your DVR model, you have the option to
modes simultaneously view four or eight camera feeds at once.
18 Previous/Next Moves to previous or next group of cameras.
Page
19 Close Screen(s)
Close one screen (left button) close all screens (right button)
(Mac only)
20 Device List
The list of connected DVRs being monitored by View Client (Mac only)
21 Add/Delete/Edit
Add and remove DVRs from the list of connected DVRs or edit the
DVR (Mac Only) connection details.
31