16 ELECTRICAL SYSTEM
16.8
188
V00615-10
Checking the low beam headlight adjustment
A
0 0 A
B
0 0 B
400726-10
–
Position the socket with the high beam bulb in the headlight
housing.
–
Turn the socket clockwise.
–
Check that the lighting is functioning properly.
Finishing work
–
Check the high beam headlight adjustment. (
–
Position the vehicle upright on a horizontal surface in front of
a light wall and make a marking at the height of the center of
the low beam headlight.
–
Make another mark at a distance
Guideline
B
Distance
–
Position the vehicle perpendicular to the wall at a distance
from the wall and switch on the low beam.
p. 190)
B
under the first marking.
5 cm (2 in)
A