Checking The Low Beam Headlight Adjustment - KTM 690 Duke Owner's Manual

MAINTENANCE WORK ON CHASSIS AND ENGINE

Checking the low beam headlight adjustment

A
Remove the screw on the rear of the flasher housing.
Carefully swing the diffuser
Press the flasher bulb carefully into the holder, turn it about 30° counterclockwise and
remove it from the holder.
Info
Do not touch the reflector with your fingers and try to avoid contact will oil or
grease.
Check parts for damage and wear. Replace damaged or worn parts.
100160-10
Press the new flasher bulb carefully into the holder and turn it clockwise as far as it will
go.
Flasher light (BAU15s) (
Position the diffuser.
Insert the screw and turn it first counterclockwise until you feel it click into the thread.
Tighten the screw.
Check the flasher function.
On a light-colored wall behind a horizontal area, make a mark as high as the center of
the low beam headlight.
Make another mark at a distance of
Specification
Distance
B
Stand the motorcycle at a distance of
Specification
Distance
100159-10
forwards and remove it.
P. 153)
under the first mark.
5 cm (2 in)
in front of the wall and switch on the ignition.
5 m (16 ft)
110