15.8
Checking the low beam headlight adjustment
A
0 0 A
–
Position the socket with the high beam bulb in the headlight
housing.
–
Turn the socket clockwise.
–
Check that the lighting is functioning properly.
V00687-10
Finishing work
–
Check the high beam headlight setting. (
–
Position the vehicle upright on a horizontal surface in front of
a light wall and make a marking at the height of the center of
the low beam headlight.
–
Make another mark at a distance
B
0 0 B
Guideline
B
Distance
–
Position the vehicle perpendicular to the wall at a distance
from the wall and switch on the low beam.
400726-10
ELECTRICAL SYSTEM 15
p. 179)
B
under the first marking.
5 cm (2 in)
A
177