Setting The Clock - KTM F5360R1 Owner's Manual

8.16

Setting the clock

Info
The clock is displayed in 24-hour format.
The time must be reset if the battery was disconnected from the vehicle or the fuse was removed.
Condition
The motorcycle is stationary.
–
Press the MODE button briefly and repeatedly until ODO appears
on the display.
–
Press the MODE button and SET button simultaneously for 5
seconds.
The time display begins to flash.
Info
The clock can be set in the ODO display for each menu
by keeping the MODE button and SET button pressed
F01455-10
simultaneously.
–
Set the hours display using the MODE button.
–
Set the minutes display using the SET button.
–
Press the MODE button and SET button simultaneously.
The set time is adopted and saved.
COMBINATION INSTRUMENT 8
75