15.8
Checking the low beam headlight adjustment
–
Position the socket with the high beam bulb in the headlight
housing.
–
Turn the socket clockwise.
–
Check that the lighting is functioning properly.
V00687-10
Finishing work
–
Check the high beam headlight setting. (
–
Park the vehicle on a horizontal surface in front of a light-
colored wall and make a mark at the height of the center of
the low beam headlight.
–
Make another mark at a distance
Guideline
B
Distance
–
Position the vehicle upright at distance
switch on the low beam.
400726-10
ELECTRICAL SYSTEM 15
p. 179)
B
under the first marking.
5 cm (2 in)
A
from the wall and
177