Table of Contents
Advertisement
Certain older and unusual receivers have formats other than those listed on page 10. Locations 610 thru 615 provide
various methods to duplicate these unusual formats. Included in these overrides is the ability to call and report to
a personal pager. The timer adjustment options allowed in locations 610 and 611 sometimes can compensate for
substandard, or older telephone exchanges. It is suggested that you call CADDX technical assistance the first time
you attempt to use these override options.
Location 610 - Inter-round time of a two round parity transmission. The inter-round time will be the number
contained in location 610 times 800 mSec. If location 610 is "0", the time is determined by the individual formats in
locations 101 and 123.
Location 611 - Inter-digit time of a pulse format. If the number programmed in location 611 is something other than
"0", The inter-digit time will be that number divided by the PPS. For example, if the number in location 611 is "10",
and the format is a 20PPS format, the inter-digit time will be 10/20 of 0.5 seconds.
For locations 612 thru 615, you must add the listed values for the desired characteristics and program the
sum in the appropriate location. If the value is not added for locations 612 and 613, the converse mode will
be enabled for those locations. If the value of 1 is not added to location 612, the transmitted frequency will
be 1900 Hz. If the value of 2 is not added to location 613, the communicator will not transmit hex digits. If
neither of values 4 or 8 are added to location 613, the communicator will send messages at 40 PPS.
Location 612 - The number programmed in this location will determine the selected default as desired.
Location 613 - The number programmed in this location will determine the selected default as desired.
Location 614 - The number programmed in this location will determine the selected default as desired.
Location 615 - The number programmed in this location will determine the selected default as desired.
APPENDIX 3
VALUE
1
Set for 1800 Hz pulse transmit frequency
2
Set for 2300 Hz handshake frequency
4
Set for single round checksum frequency
8
Set for 2 digit event code
VALUE
1
Set for extended reporting
2
Set for hex digits
4
Set for 20 PPS
8
Set for 10 PPS
VALUE
1
Set for pager format
2
Set for Ademco handshake
4
Reserved
8
Set for FBI Superfast
VALUE
1
Set for Contact ID and Ademco Highspeed
2
Reserved
4
Set for 4/3 and Contact ID
8
Set for DTMF transmission format (4/2 Express, Superfast,
Ademco Highspeed, Contact ID, & Pager Format)
DESCRIPTION
DESCRIPTION
DESCRIPTION
DESCRIPTION
51
- Quick Links:
- Programming Procedures & Examples
Hide quick links:
Advertisement
Table of Contents
