Reporting User Numbers For Various Formats - Ranger 9000E Installation Manual

Location 347: Special Keypad Command Functions
When the system is armed and this location is programmed with something other than a "0", pressing the first digit
of the Master code followed immediately by the [ r ] key can create one or more of the changes described below.
Select the desired features from the table below, add their values, and program the sum in location 347. Factory
default is "1".
VALUE
1
2
4
8
REPORTING USER NUMBERS FOR VARIOUS RECEIVER FORMATS
Due to the limitations and variations of certain formats, reporting of up to 30 unique user codes requires variable
programming for these formats, which are described below.
CONTACT ID OR SIA FORMATS When using these formats, program a "1" in location 348 to enable opening
reports. Program a"1" in location 350 to enable closing reports. Program a "1" in location 354 to enable cancel
reports. The correct event code and user number (1 thru 30) will be reported.
FBI SUPERFAST FORMAT When using this format, program the desired opening code in location 348, the desired
closing code in location 350, and the desired cancel code in location 354. The correct user number will be reported.
4 + 2, AND ALL EXTENDED FORMATS When using these formats, program the desired opening code for users
1 thru 15 in location 348. Program the desired closing code for users 1 thru 15 in location 350. Program the desired
cancel code for users 1 thru 15 in location 354. The user number for users 1 thru 15 will automatically be reported
as 1 thru F. Program the desired opening code for users 16 thru 30 in location 352. Program the desired closing code
for users 16 thru 30 in location 353. Program the desired cancel code for users 16 thru 30 in location 354. The user
number for users 16 thru 30 will automatically be reported as 1 thru F.
NON-EXTENDED FORMATS When using these formats, program the opening code in location 348, the desired
closing code in location 350, and the desired cancel code in location 354. User numbers will not be transmitted with
non-extended formats.
Location 348: Communicator Code To Report Openings For Users 1-15
The Ranger 9000E has the ability to report an opening code each time the control is disarmed. The desired opening
code is programmed in this location. If this location contains "0", openings will not be reported. When using 4+2
format, the number programmed in this location is sent first. The second digit is automatically the user number.
When using the Quick-Arm digit, the user number is 29. When using a keyswitch, the user number is 30.
Location 349: Select Phone #1, 2, Internal Log, Or Any Combination To Report Openings For Users 1-15
(See Location 259)
Remove Interior Follower Bypasses.
Remove Interior Delay Bypasses.
Remove Group Bypasses.
Restart The Exit Delay.
DESCRIPTION
27