Installing The Thermoswitch - Yamaha E60HWD Service Manual

POWR
2. Install the two nuts 2, and then locking
the nut as shown.
2
3. Tighten the nuts to specified torque.
Stud bolt:
10 N·m (1.0 kgf·m, 7.2 ft·lb)
4. Remove the two nuts from the stud bolt.
5-27
Power unit
69D50282
69D50283
69D50284

Installing the thermoswitch

1. Install the thermoswitch 1, push into the
bottom of the flange on the cylinder head
cover 2.
1
2
69D50320
69D5G11