Checking The Water Pump And Shift Rod; Disassembling The Oil Seal Housing; Assembling The Oil Seal Housing - Yamaha E60HWD Service Manual

NOTE:
Set the shift to the neutral position using the
special service tool,before remove the shift
rod assembly.
Shift rod push arm:
90890-06052
Checking the water pump and shift
rod
1. Check the water pump housing for defor-
mation. Replace if necessary.
2. Check the impeller and insert cartridge
for cracks or wear. Replace if necessary.
3. Check the Woodruff key 1 and the key-
way a in the drive shaft for wear.
Replace if necessary.
a
1
4. Check the shift rod for cracks or wear.
Replace if necessary.
69D5G11

Disassembling the oil seal housing

1. Remove the oil seals using a flat head
screwdriver.
69D60035

Assembling the oil seal housing

1. Apply grease to new oil seals, and then
install them into the oil seal housing.
69D60040
Ball bearing attachment 1:
90890-06608
Driver rod L3 2: 90890-06652
Depth a:
3.5—4.5 mm (0.138—0.177 in)
Lower unit
1
2
69D60090
3
4
2
1
a
5
69D60120
6
7
8
9
6-10