AMX SC-N8012 User Manual page 54

Zoom in, out, or to 100%.
FIG. 53 Wall Arrangement Page: Top Menu Bar Icons
T
TABLE 33 Wall Arrangement Options
Option
File drop-down menu
Source drop-down menu
16:9 checkbox
Layer drop-down menu
Add Window button
Remove Window button
Show Script button
Take button
Auto checkbox
Editing field
N-Command User Manual
Fit wall to screen.
Scroll around the layout.
Description
Choose to create a new wall, open an existing project, save, delete, import, etc.
Change the source for the selected window. The current source name is displayed at the top of the
window.
Note: All windows must have a default source that will be recalled when a preset is recalled.
X, Y fields Enter the x and y coordinates of where you would like the window's upper left-hand corner to be re-
positioned (or you can use mouse to re-size).
W, H fields Enter width and height values (in pixels) to re-size the selected window (or use mouse to re-size).
Enable to lock all the windows to a 16:9 aspect ratio.
Choose a layer number for the selected window. The window with the highest layer number is displayed
in the front and the lowest is displayed in the back.
Note: Layer numbers are also used for video wall switching commands. All windows must have a unique
layer number to avoid accidentally affecting multiple windows with a command.
Click to add a new window to the current layout.
Click to remove the selected window from the current layout.
Displays the generated script from the layout that are sent to each Decoder for wall setup. These can be
copy/pasted into Script Builder.
Click to view the current layout on your displays.
Click to automatically send a Take command whenever the layout changes.
Selects/displays the wall currently being edited. It is important to note that you can create multiple
layouts for a given wall. As you create and save the different layouts, they will appear as selections at
the bottom of the screen.
Saved layouts are displayed as buttons in
this area. Use the buttons to go back and
forth between layouts that have been
created and saved for the selected wall.
Save the current layout configuration.
Appendix B: Wall Builder Tutorial
Delete the selected layout.
Return to Wall Setup page.
Adjust for bezel/edge correction (in
pixels) for the wall setup. There are
calculators available on-line which provide
rough conversions from mm to pixels.
54