AMX SC-N8012 User Manual page 18

NVR Copy Settings
The section of the NVR Controls page shown in
Table 8.
NVR Copy Settings
FIG. 13
NVR Controls Page: NVR Copy Settings
TABLE 8
Option
Destination NVR
drop-down
Recording drop-down
Copy button
MPEG Settings
The section of the NVR Controls page shown in
Table 9.
MPEG Settings
FIG. 14
NVR Controls Page: MPEG Settings
TABLE 9
Option
Recording drop-down
Bitrate drop-down
Convert button
MPEG List
Stop converting button
Delete button
Download mpeg button Select a conversion from the list and then click this
N-Command User Manual
Figure 13
Description
Choose to copy a recording from the NVR selected at
the top of the NVR Controls page to the NVR selected
as the Destination NVR.
Choose which recording you wish to copy.
Click to begin copying the recording.
Figure 14
Description
Select a recording to convert to an MPEG file.
Leave the bitrate at the recommended setting or adjust
as needed.
Click to begin the conversion.
Completed conversions are listed here.
Click to end the conversion.
Click to delete the MPEG file selected in the MPEG List.
button to download the file.
is displayed when you click the NVR Copy link. Options are described in
Notes
is displayed when you click the MPEG link. Options are described in
Notes
The higher the bitrate, the higher the quality (and the
larger the file) of the conversion.
Chapter 3: Configuration Options
18