Usb Matrix Page - AMX SC-N8012 User Manual

USB Matrix Page

Click View> USB Matrix to access the page shown in
feature USB support. Encoders are listed horizontally across the top of the page while Decoders are listed vertically down the left
side. Use this page to route which Encoder the Decoder's KVM is connected to by simply clicking the common cell on the matrix,
followed by clicking the Take button. Clicking a unit's name takes you to the configuration pages for that device. Options are
described in
Viewing Equipment with USB Support
FIG. 10
USB Matrix Page Option Descriptions
TABLE 5
Option
Hide inactive checkbox
Hide NVR checkbox
Launch Script
drop-down
All Units drop-down
Cancel button
Take button
N-Command User Manual
Table 5.
Description
Enable to hide any discovered units that are currently
not communicating (off-line).
Enable to hide all discovered N6123 Network Video
Recorders on this network.
Choose a script to launch from the drop-down menu.
Scripts are created using the Script Builder.
If you have created any User-Groups, they will be
available for selection in this drop-down menu. Once a
group is selected, only the units in that group are
displayed in the matrix.
Click to cancel any pending changes.
Click to accept changes made on this page.
Figure 10. This page displays all discovered devices on your network which
Notes
Script Builder Page on page 21
See
information.
User-Groups Page on page 33
See
information.
Chapter 3: Configuration Options
for more
for more
15