Audio Matrix Page - AMX SC-N8012 User Manual

Video Matrix Page Option Descriptions (Cont.)
TABLE 3
Option
Hide NVR checkbox
Launch Script
drop-down
All Units drop-down
Cancel button
Take button

Audio Matrix Page

Click View > Audio Matrix to access the page shown in
NVRs, ATRs, etc.) on your network. Encoders/transmit streams are listed horizontally across the top of the page while Decoders/
receive streams are listed vertically down the left side. Use this page to route audio from one device to another by simply clicking
the common cell on the matrix, followed by clicking the Take button. Clicking a unit's name takes you to the configuration pages for
that device.
You can route any N-Series Encoder to any N-Series Decoder. For example, you can route the audio from an N1000 Encoder to an
N2235 Decoder. This is why all the cells show as being common (represented by gray circles). Options are described in
Viewing Audio Equipment
FIG. 9
N-Command User Manual
Description
Enable to hide all discovered N6123 Network Video
Recorders on this network.
Choose a script to launch from the drop-down menu.
Scripts are created using the Script Builder.
If you have created any User-Groups, they will be
available for selection in this drop-down menu. Once a
group is selected, only the units in that group are
displayed in the matrix.
Click to cancel any pending changes.
Click to accept changes made on this page.
Figure
Notes
Script Builder Page on page 21
See
information.
User-Groups Page on page 33
See
information.
9. This page displays all discovered devices (Decoders, Encoders,
Chapter 3: Configuration Options
for more
for more
Table 4.
13