Appendix A: Panel Builder Tutorial; Beginning A Panel Builder Project - AMX SC-N8012 User Manual

Appendix A: Panel Builder Tutorial

Panel Builder allows you to design attractive, intuitive, and easy-to-use touch panel layouts for controlling SVSI's Networked AV
Systems and third-party equipment. Panel Builder provides an easy way to design a panel to control any room or facility with just a
few simple steps. You can choose to use button and widget libraries that are part of Panel Builder, or import your own images to
customize the panel to look exactly as you want.
The following sections explore the Panel Builder user interface, defining each option for easy reference. For more step-by-step
project building instructions, refer to the tutorials provided in Panel Builder's Help menu (see Top Ribbon Option
Descriptions section on page 45).
NOTE: Panel Builder is accessible through N-Touch (as discussed in this document), through N-Command (N8001/N8002/N8012
web-based controllers), and also through a stand-alone version that installs directly on your computer.

Beginning a Panel Builder Project

Follow these steps to begin a project in Panel Builder and explore the options provided in the Project Editor.
1. Launch Panel Builder. The Welcome screen appears.
2. Click the New
button.
3. Enter a Panel Name,
Width, and Height.
4. Click Add.
Beginning a New Project in Panel Builder
FIG. 38
5. The system launches the Project Editor (as shown in
N-Command User Manual
Figure 39).
Appendix A: Panel Builder Tutorial
43