AMX SC-N8012 User Manual page 30

TABLE 15
Option
IP Mode
MAC address
IP address
Netmask
Static address
Gateway
DNS Servers
Ping
Cancel Changes button Click to return all controls to the last saved
Save Changes button
N-Command User Manual
IP Addresses Option Descriptions
Description
Choose Static IP or Disable. When set to Static IP, an IP
address, Netmask, and Gateway address must be
manually entered.
View the MAC addresses for the Ethernet interface.
View/edit the current IP address of the N8000 unit's
Ethernet interfaces.
View/edit the current Netmask for the N8000 unit's
interfaces.
Add second and/or third Static IP addresses.
View the current Gateway address for the N8000 unit's
Ethernet interfaces. When in Static IP mode, you may
enter a new Gateway address into this field.
DNS server settings are required to reach domain
names on the Internet (such as when using an Internet
NTP service).
The Ping links allow you to test connectivity.
configuration.
Click to save changes made to this page.
Chapter 3: Configuration Options
Notes
These are general purpose IP addresses. Complicated
networks sometimes need multiple IP addresses on
N-Command. It is not used often.
Static 3rd is used for master/slave setup. If master/
slave is not needed, it can instead be used by a third
general purpose IP address.
30