Charging The Main Rechargeable Battery - Siemens F IWLAN Operating Instructions Manual

4.5.6.3

Charging the main rechargeable battery

The main rechargeable battery is not fully charged when delivered. The main rechargeable
battery is charged:
● In the HMI device while it is sitting in the docking station.
● In the charger
Note
Read the section "Safety instructions (Page 72)".
Before charging the main rechargeable battery, read the documentation that accompanies
the charger.
Requirement
The following devices are available:
● Charger° (Page 18)
● Power supply unit (Page 19)
Procedure – Connecting a charger and charging the main rechargeable battery
Note
When charging a rechargeable battery, the ambient temperature or battery temperature
should not exceed 40° C. The higher the temperature, the longer it will take for the
rechargeable battery to fully charge.
Select a location for the charger with a cool ambient temperature. Let the rechargeable
battery cool before charging it. Keep to the permitted ambient conditions.
The main rechargeable battery can be place in the charger before or after connecting the
power supply unit.
Proceed as follows:
1. Store the power supply unit in a safe place.
2. Insert the plug of the power cable into the socket of the charger.
3. Connect the charger to the mains.
The "POWER" LED lights up.
4. Place the rechargeable battery into the charger.
The rechargeable battery is fully charged once all five LEDs are lit. See section "Showing
the battery charge (Page 76)".
Wireless Teach Pendant F IWLAN V2
Operating Instructions, 08/2010, A5E02453837-01
PRELIMINARY II
1.7.2010
Mounting and connection
4.5 Connecting the HMI device
75