Table of Contents
Advertisement
4.5.4
Inserting a memory card
Only use memory cards approved for use with the HMI device, see section Accessories
(Page 16).
The following can be saved to the memory card of the HMI device:
● Operating system
● Applications
● Data
The memory card can be inserted and removed during operation. Do not remove the
memory card while data is being accessed, for example during data backup or recipe
transfer.
Requirement
● The connection compartment opens.
Procedure – inserting a memory card
Note
Read sections "Safety instructions (Page 66)" and "Opening and closing the terminal
compartment (Page 67)".
Proceed as follows:
1. Open the connection compartment.
2. Insert the memory card into the slot.
An arrow on the memory card indicates the front side and the direction of insertion. When
the memory card is correctly inserted into the slot, it stands approx. 3 mm proud of the
slot.
3. Close the connection compartment or proceed with the following tasks.
Wireless Teach Pendant F IWLAN V2
Operating Instructions, 08/2010, A5E02453837-01
PRELIMINARY II
1.7.2010
Mounting and connection
4.5 Connecting the HMI device
69
Advertisement
Table of Contents
