Use Of Function Key; Expert Level Parameters - Siemens AOP Operating Instructions Manual

8. Once the value is confirmed and accepted by pressing the
a short press of the
Pressing the
return to the main menu.
Pressing the
the parameter help screens.
6.2

Use of Function Key

A short press of the
A long press of the
6.2.1 Scrolling Function
When the user is required to change a value of a parameter, the
keys on the AOP are used to increase and decrease the value respectively.
6.2.2 Changing single digits in Parameter values
For changing the parameter value rapidly, the single digits of the display can be
changed by performing the following actions:
Ensure you are in the parameter value changing level:
1. Press
2. Change the value of this digit by pressing
3. Press
4. Perform steps 2 to 3 until the required value is displayed.
5. Press
6.2.3 Jump Function
From any parameter (rXXXX or PXXXX) a short press of the
immediately jump to r0000.
Upon returning to r0000, pressing the
6.3

Expert Level Parameters

In Expert level parameters the number of available parameters increases
significantly.
An important function of the Expert level parameters is to allow the expert user
to access the indexed parameters.
A number of parameters contain indexes that group together closely related
parameter type information.
The access level set on the inverter and not the AOP governs all access to the
various levels of parameter sets.
24
AOP Operating Instructions – Issue 07/05
6SE6400-5AP00-0BB0
and keys simultaneously, at any time, will return the user
and keys simultaneously, at any time will display
key will return the user to r0000.
key will return the user to the previous screen.
, which causes the right hand digit to blink.
again causes the next digit to blink.
to leave the parameter value changing level.
key will return the display to r0000.
will return you to your starting point.
key
and
or .
key will