Operate Menu; Operating In Local Mode - Siemens AOP Operating Instructions Manual

4

Operate Menu

4.1

Operating in Local Mode

When the AOP is connected to an inverter, Local mode is automatically
selected. The operating mode can be changed via the Main Menu as necessary
according to the users requirements. For more information on how to set the
parameters, see Section 6 below.
Function of Control Keys
Button Function
Stops the motor running.
Starts the motor running.
Move the motor at a preset frequency. When the key is
released the motor stops.
Reverses the direction of the motor.
Accesses the parameter settings.
1.
2.
Pressing
return the user to the main menu.
4.1.1 Communications Failure
When communications between the AOP and the inverter fail a warning screen
is displayed.
The user must press
If a fault occurs again, the AOP will assume it is not connected to an inverter.
The user is then returned to the Main Menu.
If the AOP has failed to establish initial communications with an inverter, any
attempt to issue the "operate" command from the Main Menu will result in an
error warning screen being displayed.
The user must press
returned to the Main Menu.
4.1.2 Display Drive State
The AOP has the ability to monitor the state of the inverter and motor to which it
is connected.
The current activity of the inverter and motor will be displayed, including any
fault conditions.
AOP Operating Instructions – Issue 07/05
6SE6400-5AP00-0BB0
A short press toggles the position of the cursor
when editing parameters.
A long press returns the user to the previous
screen.
and simultaneously, in any screen or sub-menu will
to acknowledge the fault condition.
to acknowledge the fault condition. The user is then
19