Setting Ribbon Type, Media Type, And Print Strobe; Setting Color Options - Rimage Prism CDPR11 User Manual

Rimage PrismPlus!

Setting ribbon type, media type, and print strobe

1. Navigate to printing properties.
2. Select the Device Settings tab.
3. Select the type of Installed Ribbon.
Note: Double Print is a feature that allows you to print the same label twice on the disc.
Different types and brands of media have different printing characteristics. If you would like
the printed areas on your discs to have more density, try enabling Double Print.
4. Select the Media Type.
5. Set the Master Print Strobe:
•
To achieve the best print results for monocolor printing, set the Master Print Strobe to
350 ms.
•
To achieve the best print results for color printing, set the Master Print Strobe to 400 ms.
•
To increase the printhead life, set the Master Print Strobe to the lowest setting that
provides satisfactory printing.
6. To Enable Color Sub-Strobes, select Enabled.

Setting color options

Printing in monocolor
1. Install a monocolor ribbon in the printer.
2. Navigate to printing properties.
3. Select the Device Settings tab.
4. Select the Installed Ribbon setting and select Monocolor.
5. Select the Master Print Strobe setting and set the value from the table below.
Media Surface
DVD or Regular
Thermal white
overcoat
6. Select the Detect Media Change option.
•
If you are using a Rimage autoloader, select No.
•
If you are making multiple copies on a standalone PrismPlus, select Yes.
Note: When the Detect Media Change option is enabled, you must press the
Operator button after you remove the printed disc and place a new disc on the tray.
7. Disable the Perfect Print option. This option is only used for the Rimage AutoPrinter.
8. Select the Media Type.
9. To save the changes, select OK.
10
Print strobe Print strobe
setting for black setting for red
ribbon ribbon
325-400
350-400
Print strobe
setting for blue
ribbon
375-425 350-400
375-425 350-400
110635_G