Learn More; Safety Information; Compliance Testing - Rimage 480i User Manual

Rimage 480i Printer

Learn More

Safety information

This manual and the indications on the product allow proper and safe operation. The indication marks below help protect
you and other persons from injury, and equipment from damage.
Warning! Ignoring this sy
the hardware.
Caution: Ignoring this symbol could result in loss of data or incorrect operation of the hardware.
To ensure safet y, please read the precautions in the User Guide and familiarize yourself with their meaning before using
the equipment.
Warning! For continued protection against risk of fire, replace the fuse only with same type and rating. An
authorized technician should perform all service procedures.
Warning! Ink may be harm
immediate medical attention

Compliance testing

Model: Disc C olor Printer 480i
Product ID: CDPR4
Notice for USA
Tested to Comply with FCC Standards FOR HOME OR OFFICE USE.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must ac
received, including interference that may cause undesired operation. Pursuant to Part 15.21 of the FCC
Rules, any changes or modification to this equipment not expressly approved by Rimage Corporation may
cause harmful interference, and void your authority to operate this equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is
particular installation. If this equipment does ca
which can be determined by turning the equipment off and on, the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and receiver.
•
Connect the equipment into an outlet on a circuit d
• Consult
the dealer or an experienced radio/TV technician for help.
• This product complies with UL 60950 3
Notice for Canada
This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numerique de la classe B
est conform e a la norme NMB-003
This product complies with CAN/CSA-C22.2 No. 60950-00 3
Notice for Europe
This product is in conformity with the EMC Directive (89/336/EEC) and the Low-Voltage Directive
(73/23/EEC) through compliance with the following European standards: EN 55022: 1998 + Amd 1: 2000
Class B Limit; EN 55024: 1998; EN 61000-3-2:2000; EN 61000-3-3:1995 + Amd 1: 2001;
EN 60950: 2000. The CE mark has been affixed in accordance with the CE Marking Directive 93/68/EEC.
16
mbol failing to take or avoid a specific action could result in physical harm to the user or
ful if swallowed. Avoid contact with eyes. Ink contains nitrites. If ingested, seek
. Keep out of reach of children.
rd
Edition.
du Canada.
no guarantee that interference will not occur in a
use harmful interference to radio or television reception,
user is encouraged to try to correct the
ifferent from that to which the receiver is connected.
rd
Edition.
cept any interference
110761_C