To Configure The Firewall - Agilent Technologies 86100C Quick Start Manual

To configure the firewall

This procedure applies to instrument software revision A.08.00 and above.
Although it describes the settings for the Windows Firewall, settings using a
different firewall will be similar. These settings allow control of the 86100C
DCA over SICL/LAN and allow the Agilent Connection Expert to locate the
86100C.
1 Click Help > About 86100C and confirm that software revision A.08.00 or above
is installed.
2 Minimize the 86100C application to view the Windows desktop.
3 Click Start > Control Panel > Security Center.
4 Click Windows Firewall.
5 On the Exceptions tab, clear or select to unblock (allow) the Agilent Remote
I/O Port Mapper Utility and the Agilent Remote I/O Server. These programs
allow control of the 86100C DCA over SICL/LAN. If these utilities are not listed,
click Add Program in the dialog box and add them using the following paths:
Agilent Remote I/O Port Mapper Utility
Path: C:\Program Files\Agilent\IO Libraries Suite\bin\portmap.exe
Agilent Remote I/O Server
Path: C:\Program Files\Agilent\IO Libraries Suite\bin\siclland.exe
Figure 2-15. 86100C SICL/LAN Programs
6 Click the Advanced tab.
7 Click ICMP to open the ICMP Settings dialog box.
Using the 86100C
If the Infiniium DCA has a Problem
2-27