Step 8. Calibrate The Touch Screen - Agilent Technologies 86100C Quick Start Manual

Installing the 86100C

Step 8. Calibrate the touch screen

Step 8. Calibrate the touch screen
The touch screen configuration utility aligns and orientates the touch screen
with the display so that when you touch an element on the display screen, the
instrument can detect the task that you want to perform. The display will
always function as a touch screen, even when a mouse and keyboard are con-
nected.
1 On the 86100C display, click Utilities > Touch Screen Config.
2 On the displayed dialog box's Main tab, click the Calibrate button.
Figure 1-12. Touch Screen Calibration
3 Follow the on-screen instructions, while touching the displayed touch targets.
The calibration will time out within 20 seconds, if you do not touch the screen.
4 Each time that you touch the screen, an audible beep is heard. To turn the
audible click sound off, select the Touch Settings tab. Then, repeatedly click
the button shown in
button's label reads "No beep".
5 Close the dialog box.
1-16
Figure 1-13 on page 17 (in the Touch Sound area) until the