Step 3. Install The Modules - Agilent Technologies 86100C Quick Start Manual

N O T E
1 Slide the module into an available front-panel slot.
2 Finger tighten the two knurled locking screws on the module's front panel.

Step 3. Install the modules

Up to two modules can be inserted into the Infiniium DCA. All documentation
(including specifications) for plug-in modules is located in the 86100C's Help
system. To access the Help system, complete the installation steps, turn on
the 86100C, and click Contents on the Help menu.
You can safely insert and remove modules from the mainframe while the
86100C is powered on; this is known as hot swapping (also known as hot
plugging) and it greatly reduces the time required to change modules for
different measurement needs.
You can remove or install a module while the instrument is operating.
Figure 1-2. Installing a Module
Installing the 86100C
Step 3. Install the modules
1-7