C A U T I O N
C A U T I O N
1 Press the ON/OFF button,
2 Wait until the Welcome to the Windows XP Setup Wizard appears as shown in
Step 6. Windows Setup Wizard
This step requires several minutes to prepare Windows XP using the Windows
XP Setup Wizard. During the following steps, you will be instructed to "click"
with the pointing device. You can use a mouse (if you connected it) or you can
touch the screen with your finger.
Before switching on this instrument, make sure the supply voltage is in the specified range.
Avoid touching the screen with a sharp object, as this could result in damage to the display.
Instead, use your finger.
front panel.
Figure 1-5. ON/OFF Button
the following figure.
, located at the lower left-hand corner of the
Installing the 86100C
Step 6. Windows Setup Wizard
1-11