D Transmitting A Polling Reply Call - Icom IC-M92D Instruction Manual

8
DSC OPERATION
D Transmitting a Polling Reply call
Transmit a Polling Reply call when a Polling Request call is
received.
When the "POSITION ACK" in DSC Settings is set to 'Auto
TX' (p. 61), the transceiver automatically transmits a reply
call when receiving a Polling Request call.
Quick Reply:
When a Polling Request call is received, beeps sound and
q
the screen as shown below is displayed.
Push [ALARM OFF] to stop the beeps.
Push [ACK].
w
43
• Push [INFO] to display the Polling Request call information.
Push [BACK] to return to the previous screen, or push [ACK].
The Polling Reply confirmation screen is displayed.
e
Push [CALL] to transmit the reply call.
While transmitting the reply call, the screen as shown be-
r
low is displayed, and then returns to the normal operating
mode.