Preparation - Icom IC-M92D Instruction Manual

MMSI code programming
■
The 9 digit MMSI (Maritime Mobile Service Identity: DSC self
ID) code can be programmed at power ON.
NOTE:
• This initial code programming can be performed only the
first time to turn the power ON.
• The programming can only be done once.
• After the programming is completed, it can be re-pro-
grammed only by your dealer or distributor.
[ ] turn ON the power.
First, push
q
• The opening display appears.
"MMSI" display appears and warning alarm sounds for 2
•
seconds.
ENT] to Register Your MMSI" appears.
"Push [
w
• Do not push [CLEAR] while this screen is displayed.
Push [Y]/[Z]/[Ω]/[≈] to select and input with [ENTER].
e
r Select "FINISH" and push [ENTER] to register.
t When "MMSI CONFIRMATION" screen appears, input the
previously registered 9 digited code to confirm the regis-
tration. Then, push [ENTER] to register.
• Automatically enters the functional mode if the registration is
valid.

PREPARATION

D MMSI code check
The 9 digit MMSI code can be checked.
Push [MENU].
q
[Y]/[Z] several times to select "MMSI/GPS Info",
Push
w
then push [ENTER] to enter.
Select " EXIT" to return to the main menu screen or "BACK"
e
to return to the previous screen.
4
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
8