Dsc Settings - Icom IC-M92D Instruction Manual

DSC Settings

■
D Position Input
(See page 22)
D Add Individual ID/Group ID
D Delete Individual ID/Group ID
D Automatic Acknowledgement
These items set the Automatic Acknowledgement function to
"Auto TX" or "Manual TX."
When an Individual, Position Request, Position Report, Poll-
ing Request or Test Call is received, the transceiver auto-
matically transmits an Individual Acknowledgement, Position
Reply, Position Report Reply*, Polling Reply or Test Acknowl-
edgement Call, respectively.
*Only when the received Position Report call requires a reply.
When "INDIVIDUAL ACK" is set to "Auto TX," the trans-
ceiver automatically transmits the Acknowledgment call
including "Unable to Comply" (No Reason Given) after re-
ceivng the Individual call.
q Enter either "INDIVIDUAL ACK," "POSITION ACK," "TEST
ACK" in the DSC Settings menu.
➪ DSC Settings
MENU
(Push [MENU]) (Push [p]/[q], then push [ENT].)
➪ DSC Settings
MENU
➪ DSC Settings
MENU
(See pages 19, 20)
(See page 21)
➪ Individual ACK
➪ Position ACK
➪ Test ACK
Rotate Dial to select "Auto TX" or "Manual TX," then push
w
[ENT].
• Push [BACK] to cancel and return to the DSC Settings menu.
Push [EXIT] to return to the normal operating mode.
e
8
DSC OPERATION
(default)
(default)
(default)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
66