Receiving A Geographical Area Call - Icom IC-M92D Instruction Manual

Vhf marine transceiver

Hide thumbs Also See for IC-M92D:

Table of Contents

Receiving a Geographical Area Call

When a Geographical Area Call (for the area you are in) is

received:

➥ The emergency alarm sounds for 2 minutes, depending on

the received Category.

➥ "RCVD GEOGRAPHICAL CALL" pops up. The LCD back-

light blinks for 2 minutes, depending on the received Cat-

egory.

Push [ALARM OFF] to stop the alarm and the backlight

blinking.

• If you haven't pushed [ALARM OFF] within 2 minutes, the next

screen automatically appears, depending on the received Cat-

egory.

Push either softkey to select a desired action.

[EXIT]

➥ Push to ignore the Call and return to the normal operat-

ing mode.

• The transceiver exits the DSC mode.

• "

" continues to blink and the Call is stored in the Re-

ceived Call Log.

[INFO]

➥ Push to display the Received call information. (p. 59)

[CH xx*]

* xx is specified by the calling station.

➥ Push to monitor the specified channel for an announce-

ment from the calling station.

When no GPS receiver is connected or if there is a prob-

lem with the connected receiver, all Geographical Area

Calls are received, regardless of your position.

DSC OPERATION

Table of Contents