Post Inserter Pi-502 - Konica Minolta bizhub PRO 1100 Quick Manual

7.4 Major Specifications

)Post Inserter PI-502

To use Post Inserter PI-502, mount it in one of Finisher FS-532. You can load paper into the upper and lower trays
of Post Inserter PI-502 and feed paper to an output-related optional device. On the control panel of Post Inserter
PI-502, you can configure the punch, staple, or fold function for paper to be fed from the lower tray (the configurable
function varies depending on finisher models). For details, refer to the HTML User's Guide.
Paper tray
1: Upper tray
2: Lower tray
Specifications
Paper weight
Paper size Upper tray
Lower
tray
Paper tray capacity
7-15
1
2
2 2
50 g/m to 300 g/m / 14 lb Bond to 81 lb Bond
Standard: A4 w/v, B5 w/v, A5 v, 8.5 e 11 w/v, 7.25 e 10.5 w, 5.5 e 8.5 v,
16K w/v
Custom: Widthwise 182 mm to 331 mm, Lengthwise 139 mm to 297 mm / Width-
wise 7.17" to 12.99", Lengthwise 5.47" to 11.69"
Standard: A3 w, B4 w, SRA4 w, A4 w/v, B5 w/v, A5 v, 12 e 18 w, 11 e 17 w,
8.5 e 14 w, 8.5 e 11 w/v, 7.25 e 10.5 w/v, 5.5 e 8.5 v, Foolscap
Custom: Widthwise 182 mm to 331 mm, Lengthwise 139 mm to 488 mm / Width-
wise 7.17" to 12.99", Lengthwise 5.47" to 18.94"
* Foolscap refers to 8.5 e 13 w, 8.25 e 13 w, 8.12 e 13.25 w, and 8 e 13 w.
2
200 sheets (80 g/m / 21 lb Bond) or within 30 mm / 1.18" thick for the upper tray
and lower tray each
*
, 8K w, 16K w/v