Greenlee Quick Draw 7804SB Service Manual

Greenlee Quick Draw 7804SB Service Manual

Hydraulic punch drivers
Hide thumbs Also See for Quick Draw 7804SB:

Advertisement

Hydraulic Punch Drivers
999 4732.3
SERVICE MANUAL
7804SB / 7806SB
Quick Draw
7704SB / 7706SB
Quick Draw Flex™
Quick Draw
Serial Codes AHJ and YZ
Read and understand all of the instructions and
safety information in this manual before operating
or servicing this tool.
© 2002 Greenlee Textron
®
®
8/02

Advertisement

Table of Contents
loading

Summary of Contents for Greenlee Quick Draw 7804SB

  • Page 1 Quick Draw Flex™ Quick Draw ® Hydraulic Punch Drivers Serial Codes AHJ and YZ Read and understand all of the instructions and safety information in this manual before operating or servicing this tool. 999 4732.3 © 2002 Greenlee Textron 8/02...
  • Page 2: Table Of Contents

    Instruction Manual: Publication 999 4730.7 All specifications are nominal and may change as design improve- ments occur. Greenlee Textron shall not be liable for damages resulting from misapplication or misuse of its products. Quick Draw Flex is a trademark and Quick Draw is a registered trademark of Greenlee Textron.
  • Page 3: Important Safety Information

    • Near junction boxes with ener- gized circuits Failure to observe this warning can result in severe injury or death. Greenlee Textron / Subsidiary of Textron Inc. 4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815/397-7070...
  • Page 4: Maintenance

    4. Fill the rubber bladder to the point of overflow and replace the bladder plug. Wipe the bladder clean of excess oil and reassemble the reservoir handle. Greenlee Textron / Subsidiary of Textron Inc. 4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815/397-7070...
  • Page 5: Troubleshooting

    Damaged release valve stem seal. Refer to “Release Valve” inspection in the “Inspection and Adjustments” section. Greenlee Textron / Subsidiary of Textron Inc. 4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815/397-7070...
  • Page 6: Disassembly

    Re-seat the balls before reassembly. “I” Drill Discharge Check Std. Drill Acceptable “I” Drill 5/32" Ream Release Valve 9/64" Ream Stem Intake Check “B” Drill 9/64" Ream Greenlee Textron / Subsidiary of Textron Inc. 4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815/397-7070...
  • Page 7: Reassembly

    If the lever handle (2) goes down slowly, the release valve is leaking. Re-seat or re-drill the release valve stem seat and replace O-ring (33). Greenlee Textron / Subsidiary of Textron Inc. 4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815/397-7070...
  • Page 8: Illustrations And Parts Lists

    ® Quick Draw Hydraulic Punch Drivers Illustration—7704SB / 7706SB Greenlee Textron / Subsidiary of Textron Inc. 4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815/397-7070...
  • Page 9 501 0387.3 Retainer, spring ................. 1 905 4142.1 Ring, retaining ................... 1 501 0393.8 Cover, hose ..................1 500 1592.3 Decal, identification ................1 Greenlee Textron / Subsidiary of Textron Inc. 4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815/397-7070...
  • Page 10: Greenlee Textron / Subsidiary Of Textron Inc

    ® Quick Draw Hydraulic Punch Drivers Illustration—7804SB / 7806SB Greenlee Textron / Subsidiary of Textron Inc. 4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815/397-7070...
  • Page 11 905 0452.6 Ball, steel, .218 diameter ..............1 503 6894.0 Cap, reservoir handle ................ 1 503 7622.5 Decal, identification (not shown) ............1 Greenlee Textron / Subsidiary of Textron Inc. 4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815/397-7070...
  • Page 12: Draw Studs And Accessories

    33967 503 3967.2 Adapter, stud, 3/8–24 x 3/4–16 ..........1 Greenlee Textron / Subsidiary of Textron Inc. 4455 Boeing Drive, Rockford, IL 61109-2988 USA Customer Service (International): 815/397-7070 • Fax: 815/397-9247 Customer Service (North America): 800/435-0786 • USA Fax: 800/451-2632, 815/397-1865 Canada Fax: 800/524-2853 www.greenlee.textron.com...

Table of Contents