All specifications are nominal and may change as design improvements occur. Greenlee Tools, Inc. shall not be liable for Do not exceed the rated capacity of the punch. damages resulting from misapplication or misuse of its products.
Failure to observe this warning could result in severe injury or death. Greenlee Tools, Inc. 4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070 1.800.561.8187 information@itm.com www.
Page 4
Failure to observe this warning could result in severe nel with great force. injury or death. • Use only Greenlee punches, dies, and drawstuds. Other manufacturers’ components might not with- stand the forces generated by this punch driver. • Manual Punch Setup: The punch must be threaded completely onto the drawstud.
4.544" 115.4mm K3P-4 KD-4 Note: Punch and driver capacities can differ. Ensure your driver capacity is adequate before attempting to punch a hole. Greenlee Tools, Inc. 4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070 1.800.561.8187 information@itm.com www. .com...
This manual is also suitable for:
Dsh-s7/16735bbDsh-s3/4Dsh-3/4Dsh-1-1/8Dsh-7/16...
Show all