Ricoh 3590DNP Operating Instructions Manual page 51

C
Loosen the screw for the end plate,
adjust it to the paper size, and then
tighten the screw to lock the end
plate.
Note
❒ Align the screw with the appro-
priate paper size mark.
Printing on Paper Smaller than B6 JIS
A
Move the side guides outward.
B
Loosen the screw for the end plate,
move it as close to the machine as
possible, and then tighten the
screw to lock the end plate.
ABQ020S
Printing on 81.4 g/m
Paper
A
Lower the paper alignment wings.
Note
❒ Depending on the type of paper
AJK162S
that you are using, you might
not be able to use the full capac-
ity (3000 sheets) of the LCOT
when the wings are lifted.
❒ Lift the paper alignment wings
when B5 JISKL or A4K prints
are delivered curled up.
Printing Preparations
AJK163S
2
(21.6 lb.) or Heavier
ABQ023S
2
39