Ricoh 3590DNP Operating Instructions Manual page 49

D
Hold the handle and unfold the
intermediate feeding section of
the LCIT.
Note
❒ Do not release the handle.
E
Lift the end of the intermediate
feeding section and put it down
placing the wheeled support bar
onto the paper feed tray.
F
Push the LCIT into the machine
until it clicks.
G
Plug the LCIT optical cable into
the slot located at the left side of
the back of the machine.
ABQ004S
Turning On the Power
Important
❒ Make sure to turn on the power
switch of the LCS first, and then
turn on the main switch of the ma-
chine.
A
Make sure that the power cord is
firmly plugged into the wall out-
let.
B
Turn the power switch on.
The green indicator blinks.
AJK157S
ABQ006S
Printing Preparations
ACY066S
ABQ011S
37
2