Ricoh 3590DNP Operating Instructions Manual page 174

User Tools
❖ Erase Original Border Width
You can specify the width of
erased border margins for origi-
nals using this function.
Note
❒ Default:
• Metric version: 2 mm
• Inch version: 0.1"
❖ Erase Paper Border Width
You can specify the width of
erased border margins for prints
using this function.
Note
❒ Default:
5
• Metric version: 2 mm
• Inch version: 0.1"
❖ Stamp Type Defaults
You can select the stamp message
at power on with the Stamp mode.
Note
❒ Default: CONFIDENTIAL
❖ Stamp Size
You can edit the preset stamp siz-
es.
Note
❒ Default: 1 X
❖ Stamp Density
You can select the density of the
stamps.
Note
❒ Default: Normal
162
❖ Stamp Position
You can set the position where the
stamp is printed.
Press the arrow keys to adjust the
position.
Note
❒ Default:
• Metric Version:
• Position: Top Right
• Top Margin: 24 mm
• Right Margin: 24 mm
• Inch Version:
• Position: Top Right
• Top Margin: 1.0"
• Right Margin: 1.0"
Others
❖ Ignore ADF Original Size
When you place long originals in
the optional ADF, set original de-
tection to "Ignore". The machine
will not detect the original size.
Note
❒ Default: Do not Ignore
❖ Ignore Exposure Glass Original Size
When you place custom sizes orig-
inals on the exposure glass, set
original detection to "Ignore". The
machine will not detect the origi-
nal size.
Note
❒ Default: Do not Ignore
❖ Cancel Combine/Repeat Setting
Specifies whether Combine set-
tings is cleared after finishing your
print job.
Note
❒ Default: Do not Cancel