Ricoh 3590DNP Operating Instructions Manual page 46

Basics
E
Make sure that the paper feed
side plates are touching both
sides of the paper, and then push
the lock lever for the side plates
down to lock the side plates into
position.
2
Important
❒ Always make sure that you
push the lock lever for the side
plates down to lock the side
plates into position.
Note
❒ Make sure that the paper size
and orientation in the display
panel correspond with the actu-
al paper size and orientation set
on the paper feed tray.
Setting Up The Paper Delivery Tray
A
Raise the paper delivery tray slight-
ly, and then gently lower it with
your hand.
34
B
Lift the paper delivery side plates
and adjust them to match the pa-
per size.
C
Lift the paper delivery end plate
ZDCY041E
and adjust it to match the paper
size.
Note
❒ The inside of the plates should
correspond to the paper size.
ABL022S
ABL024S
ACY064S