Ricoh 3590DNP Operating Instructions Manual page 168

User Tools
Mode Setting
❖ Energy Saver Option
You can select to [Energy Saving] or
[Auto Off].
Note
❒ Default: Energy Saving
❖ Auto Cycle
Specifies whether Auto Cycle
mode is selected at power on.
Note
❒ Default: On
❖ Ignore Paper Size
5
If you are making prints on custom
size paper and the original image
does not entirely appear on the
print, select "Ignore". The machine
will not detect the paper length.
Note
❒ Default: Do not Ignore
❖ Longer Paper
You can select "Use" to allow the
use of paper longer than 432 mm,
17.0".
Note
❒ Default: Do not Use
❖ Skip Feed
You can select [Display] or [Do not
Display] and set the number of Skip
Feed.
Note
❒ Default: 2 times
❒ The time can be set from 2 to 9
times.
156
❖ Auto Quality Start Setting
You can select [On] to have the ma-
chine automatically carry out a few
idle spins when the power is
turned on. When selecting [Off],
you can restore the density by
making a few extra prints or by us-
ing the Manual Quality Start
mode.
Note
❒ Default: On
❖ No.of ldling Rotations: Auto Quality
Start
You can select how many times the
drum unit idles after the displayed
time periods have passed in Auto
Quality Start mode.
Note
❒ Default settings are follows.
*1
Low Tmp.
Normal Tmp.
*3
High Tmp.
*1
(Below 19°C or 66.2°F)
*2
(19 – 29°C, 66.2 – 84.2°F)
*3
(Over 29°C or 84.2°F)
❒ To increase the print image den-
sity, increase the number of
drum rotations, and vice versa.
Time pe-
riod
0 7 7 7
*2 0 5 5 5
0 5 5 5