Copies Aredirty; Copies Are Too Light - Ricoh NC5006 Operating Instructions Manual

WHAT TO DO WHEN THINGS GO WRONG
Copies are dirty.
Problem
The reverse side of an
original image is copied.
A shadow is copied when
copying a pasted original.
The same part of a copy is
dirty whenever making
copies. An image not on the
original appears on the copy.
Copies are too light.
Problem
When copying from a black
and white original, selecting
Auto Color Select and Auto
(Letter/Photo) modes, copies
are light.
A low contrast image on an
original is copied too light.
The add toner message
appears displayed on the
touch panel display.
When using rough surface
paper, or any coated paper,
the copies are light.
Action
Cl Adjust the ima e density level using the Manual
Image Densi
%
XT
e s. (= page 5-4)
Ll If you select t e Back Copy mode or Single Color
mode, lace a black paper in the backside of the
P origina and select Auto Image Density mode.
Q If you select the Full Color Copy mode, lighten the
background density. (II= page 6-2)
Cl Adjust the ima e density using the Manual Image
r
Density keys. I= page 5-4)
Cl If the exposure glass or platen cover is dirty, clean it.
(= page 1-6)
If
not,
please contact your service representative.
Action
Q Do not select Auto Color Select and Auto (Letter/
Photo modes to ether when copying from a black
11 7 and w ite ori ina.
8 Select Black opy mode or select Letter mode.
Cl Adjust the ima e density level using the Manual
\ Image Density eys. (= page 5-4)
Ll It is time to add toner. (= page 3-1 O)
El Rough surface paper and any coated paper are
not recommended as a copy paper.
9-4