Copy Paper Selection; Auto Paper Selection - Ricoh NC5006 Operating Instructions Manual

COPY
PAPER SELECTION
COPY PAPER SELECTION
2
Auto Paper Selection
(Kw=l)
The copier selects a suitable size of copy paper based on the original size and the
reproduction ratio. It is not necessary to select a paper tray manually.
Cl Originals which are of a nonstandard size, or smaller than A5 or
.51/2"
x 81/2" size, cannot be detected. In
such cases, select the paper size manually.
Manual Paper Selection
(Keys =2)
You can select the copy paper manually by touching one of the paper tray keys.
By-pass Feed Selection
(Key= 3)
In addition to feeding paper from paper trays, copy paper can be fed from the by-pass feed
tray.
Cl Available paper size:
148-432
mm or 5,8"-17.0"
1
100-297
mm
or 3.9" – 11.7''"
B Available paper thickness: 64- 157g/m2 or 17-42 lb
13 Check which keys should be selected according the type of copy paper (see next page).
5-6