Copy Image Is Blurred; Moire Is Reproduced On Copies - Ricoh NC5006 Operating Instructions Manual

WHAT TO DO WHEN THINGS GO WRONG
Copy image is blurred.
Problem
Copy image is blurred.
Cl Select the image type mode as follows (= age 5-5):
E
When copying a ma and you want to ma e the
r letters on the map c ear, select the Letter mode.
When cop ing an original with letters and photo
f images, se ect Auto (Letter/Photo) mode.
QWhen cop ing photo image or drawings, select
J
Photo mo e.
Cl Adjust the sharpness and contrast of the image.
(= page 6-2)
Color tone of copies is not reproduced well.
Problem
Color tone of copies is too
dark or too light.
Color tone of copies is
different from that of originals.
Color tone of copies is
completely different from that
of originals.
Color tone of copies is
uneven.
Action
Action
Cl Adjust the ima e density level using the Manual
% Image Density eys. (E page 5-4)
Cl Adjust the Single Color or Color Balance.
(= pages 6-3 or 6-5)
Cl Call your service representative.
Q If you are using damp paper, replace with dry,
undamaged paper.
Cl Press down on the platen cover where the copy
image is uneven.
Q Call your service representative.
Moire is reproduced on copies.
Problem
A moire pattern is produced
on copies as shown in the
illustration.
I
I ,
1
I
Action
2
c1
c1
If you selected the Letter mode, cancel it and select
the Auto (Letter/Photo) mode or Photo mode.
i
I= page 5-5)
djust the sharpness to a softer level.
I
I= page 6-2)
lace the original on the exposure glass at a slight
angle.
9-5