Bernina Bernette London 2 Instruction Manual page 30

2 3 5
Attaching the presser foot
EN
holder
Attention:
7XUQ SRZHU VZLWFK WR 2 EHIRUH FDUU\LQJ RXW
DQ\ RI WKH RSHUDWLRQV EHORZ
Raise the needle to its highest position
and raise the presser foot lever. Attach the
presser foot holder (b) to the presser foot bar
D   7LJKWHQ WKH ¿[DWLRQ VFUHZ $
Attaching the presser foot:
Lower the presser foot holder (b) until the
cut-out (c) is directly above the pin (d). (2)
Lower the presser foot holder (b) and the
presser foot (f) will engage automatically.
Removing the presser foot:
Raise the presser foot.
Release the pressure foot by raising lever (e)
located at the back of the foot holder. (3)
Attaching the seam guide:
Attach the seam guide (g) in the slot as
illustrated.
Adjust the distance as required for hems,
pleats, etc....(4)