Connecting To The Ieee 1394 Interface (Scsi Print/Ipv4 Over 1394) - Ricoh Aficio ISC 615G General Settings Manual

Connecting the Machine
Note
❒ This machine does not come with a USB interface cable. Make sure you
purchase the appropriate cable for the machine and your computer.
❒ The USB 2.0 interface board is supported by WindowsMe / 2000 / XP,
1
Windows Server 2003, Mac OS X10.3.3 or higher.
• For WindowsMe:
Make sure to install "USB Printing Support". When used with Win-
dowsMe, only a speed equal to that of USB 1.1 is possible.
• For Mac OS:
To use Macintosh, the machine must be equipped with the optional
PostScript 3 unit. When used with Mac OS X10.3.3 or higher, a transfer
speed of USB 2.0 is supported.
❒ For details about installing the printer driver, see "Preparing the Ma-
chine", Printer Reference.
Reference
"Preparing the Machine", Printer Reference

Connecting to the IEEE 1394 Interface (SCSI print/IPv4 over 1394)

Connect the IEEE 1394 interface cable to the IEEE 1394 interface board.
A
Connect the IEEE 1394 interface cable to the IEEE 1394 port.
B
Connect the other end of the cable into the interface connector on the host
computer.
Check the shape of the connector to the computer. Connect the cable firmly.
Note
❒ Use the interface cable supplied with the optional IEEE 1394 interface board.
❒ Two interface ports are available for connecting the IEEE 1394 interface ca-
ble. Either is suitable.
❒ If you have an interface that has with a ferrite core, connect the end that is
nearest the ferrite core to the machine.
❒ For details about installing the printer driver, see "Preparing the Ma-
chine", Printer Reference.
10
AMB006S