Ricoh 2018 Facsimile Reference Manual page 78

Troubleshooting
- Out of paper display message - - -
If the paper tray runs out of paper, "
" appears on the display, asking you to add more paper.
[Exit].
Note
❒ If there is paper left in the other paper trays, you can receive messages as usu-
al, even if the message appears on the display.
❒ You can turn this function on or off with the User Parameters. See p.80 "User
Parameters", Facsimile Reference <Advanced Features> (switch 05, bit 7).
- - Network error display message - -
If the "
Check whether there are any network problems.
5
the machine is not correctly connected to the network or the settings of the ma-
chine is not correct. If you do not need to connect the machine to the network,
you can select so that the message disappear and the key goes out with User Pa-
rameters. See p.80 "User Parameters", Facsimile Reference <Advanced Features>
(switch 21, bit 6).
Note
❒ When you restart connecting the machine to the network, make sure to set
"Display" with User Parameters. Otherwise, you cannot check the status of
the network connection.
72
Out of paper. Load it, then press
" message appears,