Receiving Calls - BellSouth MH9003 Owner's Manual Installation And Operating Instructions

Receiving Calls

Receiving Calls with the HANDSET on the BASE
UNIT
1. When the phone rings, lift the HANDSET.
The IN USE indicator will light up.
(Note: The HANDSET RINGER SWITCH
must be in the "ON" position for ringer
to operate.)
2. Start your conversation.
3. To end your conversation, either press
the TALK button or place the HANDSET
on the BASE UNIT. If you place the HANDSET
on the BASE UNIT charge cradle, you activate
the automatic STANDBY feature.
Receiving Calls with the HANDSET off the BASE
UNIT
1. When the phone rings, press the TALK button. The IN USE
indicator will light up.
2. Start your conversation.
3. To end your conversation, either press the TALK button or place the
HANDSET on the BASE UNIT. If the HANDSET is placed on the BASE
UNIT charge cradle, the automatic STANDBY feature is then activated.
(NOTE: The BASE UNIT has no ringer and does not ring when receiving
an incoming call.)
NOTE:
Once the HANDSET is fully charged, it is operable for approximately 6 hours of
continuous talk use and approximately 5 days when the HANDSET is left off the
BASE UNIT in STANDBY mode depending on frequency of use.
14