Table of Contents
Advertisement
Problem Solving
Excess static, check the following:
1. Check to see that the ANTENNA is not touching another metal object.
Raise the ANTENNA.
If after pressing the TALK button, you receive three beeps and no dial tone,
check the following:
1. BASE UNIT is plugged into power source.
NOTE: If no telephones in the house
are working, disconnect one set at a time to
verify that none of the phones are causing the
problem. If you still have a problem after doing
this and your telephone still does not work,
please contact your local phone company.
IMPORTANT
When you hear interference,
press the CH button to change
the operating channel.
22
Advertisement
Table of Contents
