Servicing - ResMed escape s8 User Manual

R A
EPLACING THE
To replace the air filter:
1. Remove the air filter cover at the back of the
2. Remove and discard the old air filter.
3. Insert a new filter with the blue tinted side facing out from the device.
4. Replace the air filter cover.
Inspect the air filter every month to check if it is blocked by dirt or contains holes. With
normal use of an
more often if your device is in a dusty environment).
WARNING
!
Do not wash the air filter. The air filter is not washable or reusable.
•
The air filter cover protects the device in the event of accidental liquid spillage
•
onto the device. Ensure the air filter and air filter cover are fitted at all times.
S
ERVICING
CAUTION
!
Do not attempt to open the S8 Escape case. There are no user serviceable
•
parts inside.
Inspection and repair should only be performed by an authorized agent. Under
•
no circumstances should you attempt to service or repair the flow generator
yourself.
This product ( S8 E
Center five years from the date of manufacture. Prior to this, the device is intended to
provide safe and reliable operation provided that it is operated and maintained in
accordance with the instructions provided by ResMed. Applicable ResMed warranty
details are provided with the device at the time of original supply. Of course, as with
all electrical devices, if any irregularity becomes apparent, you should exercise caution
and have the device inspected by an Authorized ResMed Service Center.
If you feel that your flow generator is not performing properly, see "Troubleshooting"
on page 26.
F
IR ILTER
S8 E , the air filter needs to be replaced every six months (or
SCAPE
) should be inspected by an authorized ResMed Service
SCAPE
S8 E .
SCAPE
Air filter cover
C
LEANING AND
M 23
AINTENANCE