S8 Modules; Using A Blank Module; Using A Res Scan Data Card Module - ResMed escape s8 User Manual

S8 M
ODULES
Note: Do not remove modules while power is connected to the S8 Escape.
Your S8 E
SCAPE
R S ™ Data Card module.
ES CAN
U B M
SING A LANK
Please refer to the illustrations in section F of the illustration sheet.
The blank module is a protective cover on the
remove or attach this module, for example to use the serial adapter.
To remove the blank module, pull it off the back of the
communications port (F-1).
To attach the blank module, push the blank module onto the data communications
port, until the module clicks into place (F-2).
Note: To protect the data communications port, always ensure there is a module
attached to the device.
U R S
SING A ES CAN
Please refer to the illustrations in section G of the illustration sheet.
The R S Data Card module is an accessory to the
ES CAN
Card with the Data Card module to collect data and update settings in the
The module and card give your clinician convenient access to data about your
treatment, and can provide you with new device settings from your clinician without
you having to leave home.
A
TTACHING THE
To attach the Data Card module, push it onto the data communications port at the
S8 E
back of your
R
EMOVING THE
To remove the Data Card module, pull it off the back of the
Note: To protect the data communications port, always ensure there is a module
attached to the device.
U D
SING THE ATA
Please refer to the illustrations in section H of the illustration sheet.
If your clinician needs to review your treatment, they will ask you to use the Data Card
to copy data from your
be provided in a convenient mailback envelope.
Data that is copied to a Data Card is still stored and available on the
It takes approximately five seconds to copy data onto the Data Card.
will have one of two modules fitted to the back: a blank module or a
ODULE
D C M
ATA ARD ODULE
M
ODULE
until it clicks into place (G-1).
SCAPE
M
ODULE
C C
ARD TO OLLECT DATA
S8 E , and to return the card to them. The Data Card will
SCAPE
S8 E . At times, you may wish to
SCAPE
S8 E to show the data
SCAPE
S8 E . Use a
SCAPE
S8 E
SCAPE
R S Data
ES CAN
S8 E .
SCAPE
(G-2).
S8 E .
SCAPE
S8 M 19
ODULES