Toshiba GRL100-701B Instruction Manual page 444

List of Information
INF Description
Standard Information numbers in monitor direction
System Function
0 End of General Interrogation Transmission completion of GI items.
0 Time Synchronization Time Synchronization ACK.
2 Reset FCB Reset FCB(toggle bit) ACK
3 Reset CU Reset CU ACK
4 Start/Restart Relay start/restart
5 Power On Relay power on.
Status Indications
If it is possible to use auto-recloser, this item is set
16 Auto-recloser active
active, if impossible, inactive.
If protection using telecommunication is available,
17 Teleprotection active
this item is set to active. If not, set to inactive.
If the protection is available, this item is set to
18 Protection active
active. If not, set to inactive.
19 LED reset Reset of latched LEDs
Block the 103 transmission from a relay to control
20 Monitor direction blocked
system. IECBLK: "Blocked" settimg.
Transmission of testmode situation froma relay to
21 Test mode
control system. IECTST "ON" setting.
When a setting change has done at the local, the
22 Local parameter Setting
event is sent to control system.
23 Characteristic1 Setting group 1 active
24 Characteristic2 Setting group 2 active
25 Characteristic3 Setting group 3 active
26 Characteristic4 Setting group 4 active
27 Auxiliary input1 Binary input 1
28 Auxiliary input2 Binary input 2
29 Auxiliary input3 Binary input 3
30 Auxiliary input4 Binary input 4
Supervision Indications
32 Measurand supervision I Zero sequence current supervision
33 Measurand supervision V Zero sequence voltage supervision
35 Phase sequence supervision Negative sequence voltage supevision
36 Trip circuit supervision Output circuit supervision
37 I>>backup operation
38 VT fuse failure VT failure
39 Teleprotection disturbed CF(Communication system Fail) supervision
46 Group warning Only alarming
47 Group alarm Trip blocking and alarming
Earth Fault Indications
48 Earth Fault L1 A phase earth fault
49 Earth Fault L2 B phase earth fault
50 Earth Fault L3 C phase earth fault
51 Earth Fault Fwd Earth fault forward
52 Earth Fault Rev Earth fault reverse
Contents
GI Type
--
--
--
--
--
GI
GI
GI
--
GI
GI
GI
GI
GI
GI
GI
GI
GI
GI
GI
GI
GI
 443 
IEC103 Configurator Default setting
COT FUN
ID Signal No. OFF ON
8 10 255 --
6 8 255 --
5 3 192 --
5 4 192 --
5 5 192 --
Not supported --
1 1, 9, 11, 12 192 1411
1 1, 9, 12 192 1412
1 1, 9, 12 192 1413
1 1, 11, 12 192 1409
1 9, 11 192 1241
1 9, 11 192 1242
Not supported
1 1, 9, 11, 12 192 1243
1 1, 9, 11, 12 192 1244
1 1, 9, 11, 12 192 1245
1 1, 9, 11, 12 192 1246
No set
No set
No set
No set
1 1, 9 192 1267
1 1, 9 192 1268
1 1, 9 192 1269
Not supported
Not supported
1 1, 9 192 891
1 1, 9 192 226
1 1, 9 192 1258
1 1, 9 192 1252
No set
No set
No set
Not supported
Not supported
6 F 2 S 0 8 5 0
DPI
-- --
-- --
-- --
-- --
-- --
-- --
1 2
1 2
1 2
-- 2
1 2
1 2
1 2
1 2
1 2
1 2
1 2
1 2
1 2
1 2
1 2
1 2
1 2